HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 52
Heat sink
View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description Heat sink (includes replacement thermal material) Spare part number 907557-001 Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 24), and then remove the following components: a. Battery (see Battery on page 26). b. Fan (see Heat sink fan on page 30). c. System board (see System board on page 39). Remove the heat sink: 1. Position the system board upside down. 2. Loosen the three captive Phillips screws (1) that secure the heat sink to the system board. NOTE: Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach it. 3. Remove the heat sink (2). 44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts