HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 47
System board, When replacing the system board
View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
System board All system boards use the following part numbers: xxxxxx-001: Non-Windows operating systems xxxxxx-601: Windows 10 operating system Description System board equipped with processor, a graphics subsystem with UMA memory and replacement thermal material for use in 13-w000 - 13-w099 models: Intel Core i7-7500U processor, 16 GB of system memory Intel Core i7-7500U processor, 8 GB of system memory Intel Core i5-7200U processor, 8 GB of system memory Intel Core i5-7200U processor, 4 GB of system memory System board equipped with processor, a graphics subsystem with UMA memory and replacement thermal material for use in 13-ac000 - 13-ac099 models: Intel Core i7-7560U processor, 16 GB of system memory Intel Core i7-7500U processor, 16 GB of system memory Intel Core i7-7500U processor, 8 GB of system memory Intel Core i5-7200U processor, 8 GB of system memory Intel Core i5-7200U processor, 4 GB of system memory Spare part number 907558-xx1 907559-xx1 907560-xx1 907561-xx1 918040-xx1 918042-xx1 918041-xx1 918044-xx1 918043-xx1 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Remove the battery (see Battery on page 26). 6. Remove the fan (see Heat sink fan on page 30). When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 27) ● Solid-state drive (see Solid-state drive on page 29) ● Heat sink (see Heat sink on page 44) Remove the system board: 1. Disconnect the following cables from the system board: (1) Display cable (ZIF connector) System board 39