HP StorageWorks 2/140 FW 08.01.00 McDATA Products in a SAN Environment Plannin - Page 302
Failed, ADMIN, Feature, E/OSc 8.0, E/OSi 4.6, BB_Credit value of 16. Intelligent
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
Firmware Summary Table B-3 E/OSc versus E/OSn and E/OSi - Management-Related Differences (Continued) Feature E/OSc 8.0 E/OSn 6.0 E/OSi 4.6 Diagnostics (port failure state) Port set to Failed state upon failing a user- invoked port diagnostic test. If external port diagnostics are performed without a loopback plug the diagnostic test fails, but port is not set to Failed. If external port diagnostics or management port diagnostics are performed without a loopback plug, the diagnostic test fails, but port is not set to Failed. Buffer-to-buffer credit (BB_Credit) support BB_Credit subject to a per-port maximum value and a product-wide (pool) maximum value. Refer to Distance Extension Through BB_Credit for information. BB_Credit subject to a per-port maximum value and a paddle-pair wide (pool) maximum value. BB_Credit also subject to remote fabric PFE being enabled or disabled. Refer to Distance Extension Through BB_Credit for information. Fibre Channel ports set to a BB_Credit value of 16. Intelligent ports support IP network connectivity and not assigned BB_Credits. Ports provide 96 MB of TCP packet buffering per transmission direction. Audit log entries related Flexpar feature not supported. to flexible partitioning When a user downloads firmware, performs a CTP card switchover, configures partitioning, or clears the system error light (or performs an operation with system-wide impact), the corresponding Audit log entry is recorded only for the ADMIN partition (0). Log entries are processed differently for the ADMIN partition (0) versus other partitions (1 through 3). Flexpar feature not supported. Other log entries related to flexible partitioning Flexpar feature not supported. Log entries (non Audit log) are processed differently for the ADMIN partition (0) versus other partitions (1 through 3). Flexpar feature not supported. Audit log entries (EFCM) Log contains EFCM user name and IP address of EFCM client. Log contains only the IP address of the EFCM server. Log does not contain EFCM user name and IP address of EFCM client. Remote workstations (clients) not supported through the SANvergence Manager application. The application supports an APP log that is functionally equivalent to the EFCM Audit log. In addition, the Element Manager application has an Audit log independent of SANvergence Manager. B-10 McDATA Products in a SAN Environment - Planning Manual
![](/manual_guide/products/hewlettpackard-316095b21-fw-080100-mcdata-products-san-environment-planning-guide-620000124510-2005-cc7608a/302.png)