HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 151
errFilterSet, Valid values are INFO, WARNING, ERROR, or CRITICAL.
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
errFilterSet 2 errFilterSet Sets a filter for an error log destination. Synopsis errfilterset [-d "destination"][-v "severity"] Description Use this command to set a filter for an error log destination. A filter is set based on the severity level of the messages. If no parameters are specified, this command displays the filters that are currently in use. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: -d "destination" Specify the destination to set the filter. "console" is the only valid value at this time. -v "severity" Specify the minimum severity level of the message to pass through the filter. Valid values are "INFO", "WARNING", "ERROR", or "CRITICAL". Examples To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING See Also To set the filter severity level for the console: switch:admin> errfilterset -d "console" -v "WARNING" errDump, errShow Fabric OS Command Reference 125 53-1000599-01