HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 275
fwShow, Synopsis, persistence, disable, Description, Notes, fwCon Operands, Examples
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
fwShow 2 fwShow Displays the class thresholds monitored by Fabric Watch. Synopsis fwshow [--port --persistence] | [--disable --port] Description Use this command to display the thresholds monitored by Fabric Watch. This command also displays the port persistence time and ports with all disabled thresholds. Notes This command requires a Fabric Watch license. The execution of this command is subject to Admin Domain restrictions that may be in place.1 For a description of the class thresholds supported in FOS and the restrictions that apply to some of the classes in terms of support for V/VE/VEX ports and GbE ports, refer to the help page for fwConfigure or consult the Fabric Watch Administrator's Guide. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only on Embedded platforms. TABLE 14 Access Gateway mode classes Class Environmental SFP Port Fabric F/FL_Port (Optical) F/FL_Port (Copper) Resource Operands The operands are as follows: --port --persistence Displays the time (in seconds) that a port must be persistently in a state before being marked as such. --disable --port Displays the ports that have all associated thresholds disabled. Examples To display thresholds for a fan in the SFP class: switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : Show port persistence time 4 : Quit Select an item => : (1..4) [3] 1 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class Fabric OS Command Reference 249 53-1000599-01