HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 613
Total alternate current AC Power Consumption in Watts., ENABLED User Ports Disabled
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 613 highlights
slotShow 2 DIAG RUNNING POST1 The blade is present, powered on, and running the POST (power-on self-test). DIAG RUNNING POST2 The blade is present, powered on, and running the pre-boot power on self tests). INITIALIZING The blade is present, powered on, and initializing hardware components. ENABLED The blade is on and fully enabled. ENABLED (User Ports Disabled) The blade is on but the external ports have been disabled with the bladeDisable command. ENABLED (SAS Virtualization Disabled) The blade is on, but due to an incompatibility between the FOS image and the SAS or Application image, the SAS Virtualizaion services are disabled. Only applies to the FA4-18 blade. DISABLED The blade is powered on but disabled. FAULTY The blade is faulty because an error was detected. UNKNOWN The blade is inserted but its state cannot be determined. Operands The SlotShow command supports the following operands: -p In addition to the basic slot status view, displays the following information about power consumption: • Direct current (DC) power consumption for each Blade in Watts. • Total alternate current (AC) Power Consumption in Watts. • AC efficiency, as% of total and BTU. • Power efficiency: watts/port and watts/Gb. -m In addition to the basic slot status view, displays the Brocade model name for each blade. Examples To display a basic view of all slots and their status: switch:user> slotshow Slot Blade Type ID Status 1 SW BLADE 51 FAULTY 2 SW BLADE 51 DISABLED 3 SW BLADE 55 ENABLED(User Ports Disabled) 4 SW BLADE 51 DIAG RUNNING POST2 5 CORE BLADE 52 ENABLED 6 CP BLADE 50 ENABLED 7 CP BLADE 50 ENABLED 8 CORE BLADE 52 ENABLED 9 UNKNOWN VACANT 10 AP BLADE 33 LOADING 11 SW BLADE 55 DIAG RUNNING POST1 12 SW BLADE 51 INSERTED, NOT POWERED ON 1 Fabric OS Command Reference 587 53-1000599-01