HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 647
switchCfgSpeed, Synopsis, Description, portShow, portCfgSpeed, Operands, Examples, See Also
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 647 highlights
switchCfgSpeed 2 switchCfgSpeed Configures all ports of a switch to a particular speed. Synopsis switchcfgspeed speed_level Description Use this command to configure the speed of all the ports on a switch to a particular level. The configuration is saved in flash memory and persists across switch reboots or power cycles. If any port on the switch is not capable of the specified speed setting, an error message displays for that port. The output of portShow displays the achieved speed level and portCfgSpeed displays the user's desired speed setting. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operand: speed_level Specify the speed of a port. This operand is required. Valid values are one of the following: 0 Auto sensing mode. The port automatically configures for the highest speed. 1 1-Gbit/sec mode. The port is fixed at 1 Gbit/sec. 2 2-Gbit/sec mode. The port is fixed at 2 Gbit/sec. 4 4-Gbit/sec mode. The port is fixed at 4 Gbit/sec. 8 8-Gbit/sec mode. The port is fixed at 8Gbit/sec. Examples To set the speed level for all ports on a switch: switch:admin> switchcfgspeed 0 Committing configuration...done. See Also portCfgSpeed, portShow Fabric OS Command Reference 621 53-1000599-01