HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000/1500 Modular Sma - Page 28
Firmware Flash Done
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Example command and response, using the sample information in Step 3: # /usr/bin/scu -f /dev/rscsi/c5t0d0 download /tmp/scu/msav686b397.bin save segment Downloading File "msa686b397.bin" of 1048576 bytes... Download completed successfully... DELAYING FOR 120 SECONDS WHILE FIRMWARE IS SAVED, PLEASE BE PATIENT... 120 CAUTION: Do not restart the server or the MSA until the firmware download process is complete. NOTE: The MSA LCD panel displays the message FIRMWARE FLASH STARTED when the download begins and FIRMWARE FLASH DONE when the download is complete. 6. Wait for the CLI prompt to redisplay. 7. Wait for FIRMWARE FLASH DONE to display on the MSA LCD panel. 8. Power cycle the MSA. NOTE: In dual-controller configurations, firmware on the two controllers is compared each time the MSA chassis is restarted. If the versions are mismatched, the system prompts to clone the firmware on the controller with the latest version over to the controller with the earlier version firmware. The following message is displayed on the LCD panel of the controller with the earlier firmware: 07 CLONE FIRMWARE ? '' = YES Press the > button on the LCD panel to clone the firmware. During the cloning process, informational messages are displayed on the controller LCD panels. When the cloning process is complete, the just-updated controller automatically restarts. 9. Verify that the controller firmware was updated by entering the SHOW INQUIRY command within the SCU and reading the display. Example command and response, using the sample information in Step 3: 28 Updating the components