HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000/1500 Modular Sma - Page 36

In the Send File window, Browse, 1K Xmodem

Get HP StorageWorks Modular Smart Array 1000 PDF manuals and user guides View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

5. In the Send File window: a. Click Browse, navigate to the directory in which you placed the firmware files, and then select the firmware file. b. Expand the Protocol drop-down box, and then select 1K Xmodem. c. Click Send. A 1K Xmodem status window is displayed. NOTE: The MSA controller displays the message FIRMWARE FLASH STARTED when it starts the download, and FIRMWARE FLASH DONE when the download is complete. 6. Wait for a completion message to be displayed. 7. Restart the MSA by pressing and releasing the power/standby button on the front of the MSA. NOTE: The MSA storage system must be restarted to activate any new firmware. a. Press and hold down the MSA Power on/Standby button for approximately five seconds to place the MSA in Standby mode. b. Power off all storage enclosures attached to the MSA. c. Wait approximately two minutes to ensure that the hard disk drives in the enclosures stop rotating. d. Restart all storage enclosures attached to the MSA. e. Wait approximately four minutes to allow the enclosures to complete their startup routines. f. Press and release the MSA Power on/Standby button to restart the MSA. g. Wait (up to eight minutes) for the STARTUP COMPLETE message to display on the MSA controller LCD panel. 36 Updating the components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
5.
In the Send File window:
a.
Click
Browse
, navigate to the directory in which you placed the
fi
rmware
fi
les, and then select
the
fi
rmware
fi
le.
b.
Expand the Protocol drop-down box, and then select
1K Xmodem
.
c.
Click
Send
.
A 1K Xmodem status window is displayed.
NOTE:
The MSA controller displays the message
FIRMWARE FLASH STARTED
when it starts the
download, and
FIRMWARE FLASH DONE
when the download is complete.
6.
Wait for a completion message to be displayed.
7.
Restart the MSA by pressing and releasing the power/standby button on the front of the MSA.
NOTE:
The MSA storage system must be restarted to activate any new
fi
rmware.
a.
Press and hold down the MSA Power on/Standby button for approximately
fi
ve seconds to
place the MSA in Standby mode.
b.
Power off all storage enclosures attached to the MSA.
c.
Wait approximately two minutes to ensure that the hard disk drives in the enclosures stop
rotating.
d.
Restart all storage enclosures attached to the MSA.
e.
Wait approximately four minutes to allow the enclosures to complete their startup routines.
f.
Press and release the MSA Power on/Standby button to restart the MSA.
g.
Wait (up to eight minutes) for the
STARTUP COMPLETE
message to display on the MSA
controller LCD panel.
36
Updating the components