HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000/1500 Modular Sma - Page 12
If HP Secure Path Manager software is installed, double-click
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step Description (continued) Check 7 (For systems with HP Secure Path MPIO software only) F Enable HP Secure Path services and drivers: • From the server console desktop, select Start>Run. • In the Run window, enter devmgmt.msc and then click OK to open the Device Manager Utility. • Select SCSI and RAID controllers, right-click the Compaq Secure Path Disk Bus device, and then select Enable. • Close the Device Manager Utility. • From the server console desktop, select Start>Run. • In the Run window, enter services.msc and then click OK to open the Services Utility. • In the right pane, double-click Compaq HS_ Service. • Change the Startup type from Disabled to Automatic. • Click OK to close the window. • In the right pane, double-click Secure Path Agent. • Change the Startup type from Disabled to Automatic. • Click OK to close the window. • If HP Secure Path Manager software is installed, double-click Element Manager for Secure Path in the right pane to open the Element Manager for Secure Path Properties window. • Change the Startup type from Disabled to Automatic. • Click OK to close the window. • Close the Services Utility. 8 Using the MSA1000/1500 firmware updating guide, upgrade the HP StorageWorks F MSA1000/1500 controller firmware from active/passive to active/active. 9 When the MSA firmware upgrade is complete, turn the server node off. F 10 Notify all system units connected to the MSA disk array that the disk array will F temporarily be offline. 11 Restart the disk array. F 12 Notify all system units connected to the MSA disk array that the array is back online. F 12 Migrating single-path standalone systems