HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000/1500 Modular Sma - Page 31
Description, continued, Check, Start>Run, View>Show hidden devices, Disk Drives, Scan
![]() |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Step Description (continued) Check 18 From the back of the server node, disconnect the Fibre Channel cable from the HBA F card that is connected to the passive MSA controller. 19 Notify all system units connected to the MSA disk array that the disk array will F temporarily be offline. 20 Restart the disk array. F 21 Notify all system units connected to the MSA disk array that the disk array is back F online. Post-migration steps Step Description Check 1 Restart the server node. F 2 Verify that device drivers are installed correctly within Device Manage: F • From the server console desktop, select Start>Run. • In the Run window, enter devmgmt.msc and then click OK to open the Device Manager Utility. • From the main menu, select View>Show hidden devices. • Right-click the Disk Drives icon, and then select Scan for hardware changes. • Select Disk Drives to verify that all disks are functioning properly and that the appropriate number of HP MSA Volume SCSI disk devices are present. (For example, if four LUNs are presented from the MSA disk array, four HP MSA Volume SCSI disk devices should be present.) • Select SCSI and RAID controllers and verify that the Multi-Path Support device is installed. • Close the Device Manager Utility. 3 From the back of the system unit, reconnect the Fibre Channel cable to the HBA card. F Migrating to active/active controllers in Windows environments 31
![](/manual_guide/products/hewlettpackard-storageworks-modular-smart-array-1000-hp-storageworks-10001500-modular-smart-array-application-note-migrating-activeactive-controllers-windows-environments-400678002-2006-19b434f/31.png)