HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000/1500 Modular Sma - Page 29

Step Description (continued) Check 7 (For systems with HP Basic MPIO software only) F Uninstall HP Basic MPIO software: • From the server console desktop, select Start>Run. • In the Run window, enter appwiz.cpl and then click OK to open the Add (or /) Remove Programs Utility. • Select the HP Basic MPIO program, and then click Change/Remove to uninstall the software. • Click OK. The server restarts. • Close the Add (or/) Remove Programs Utility window. • Verify that the system restarts without any issues. 8 (For systems with HP Secure Path MPIO software only) F Disable HP Secure Path services and drivers: • From the server console desktop, select Start>Run. • In the Run window, enter services.msc and then click OK to open the Services Utility. • In the right pane, double-click Compaq HS_ Service. • Change the Startup type from Automatic to Disabled. • Click Stop to stop the service. • Click OK to close the window. • In the right pane, double-click Secure Path Agent. • Change the Startup type from Automatic to Disabled. • Click Stop to stop the service. • Click OK to close the window. • If HP Secure Path Manager software is installed, double-click Element Manager for Secure Path in the right pane to open the Element Manager for Secure Path Properties window. • Change the Startup type from Automatic to Disabled. • Click Stop to stop the service. • Click OK to close the window. • Close the Services Utility. • From the server console desktop, select Start>Run. • In the Run window, enter devmgmt.msc and then click OK to open the Device Manager Utility. • Select SCSI and RAID controllers, right-click the Compaq Secure Path Disk Bus device, and then select Disable. • Click Yes when the pop-up warning is displayed. • Close the Device Manager Utility. • Click No if a pop-up window opens asking to restart the server. Migrating to active/active controllers in Windows environments 29