HP Surestore Disk Array FC60 HP SureStore E Disk Array 12H User's and Service - Page 53
click on Disk Array 12H, Tape device hardware address
![]() |
View all HP Surestore Disk Array FC60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Controller HP SureStore E Disk Array 12H Controller Firmware Download Procedure or, inside the HP firewall (HP-qualified personnel only): • http://essd.boi.hp.com • click on "Products" • click on "Disk Arrays" • click on "Disk Array 12H" • click on "AutoRAID firmware" • left click on "ARDlif_HPxx" (xx = the controller firmware revision you want to download) • save the file using "save as" to your system Once you have the ARDlif file, copy it to a tape using the following command: dd if=ARDlif of=/dev/rmt/{tapedrive} bs=2k 2. On the machine you want to download and while the operating system is running get the following information: Perform an "ioscan -fnCdisk" and "ioscan -fnCtape" to locate the arrays and the tape device and note their location. Tape device hardware address Tape device location (i.e., /dev/rmt/...): Disk array(s) bus number(s): Firmware file name needed to download (This file should be in the ARDlif file) Primary controller 53
![](/manual_guide/products/hewlettpackard-surestore-disk-array-12h-hp-surestore-e-disk-array-12h-users-service-manual-c544590901-1999-9011302/53.png)