HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 31
Step 1: Choose a Location, Table 2-1, Location Criteria, Characteristic, Requirement
View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Library Installation Library Installation Step 1: Choose a Location Table 2-1 Step 1: Choose a Location Choose a location that meets the following criteria. Take the library there before unpacking it. Location Criteria Characteristic Requirement Room temperature 50°-104° F (10°-40° C) Power source AC power voltage: 100-127/200-240 V Air quality Minimal sources of particulate contamination. Avoid areas near frequently used doors and walkways, stacks of supplies that collect dust, and smoke-filled rooms. CAUTION: Excessive dust and debris can damage tapes and tape drives. Adequate clearance Positioning the library depends on how it will fit in the computer room. Placed in a row of peripherals with the mailslot facing out: Front 86 cm (34 in.) for operator access Back 56 cm (22 in.) for cooling and service Sides Adjacent to other cabinets; roll library out to access the bulk load access door wall Back Bulk load access Free standing/against a wall: Front 61 cm (24 in.) for operator access Back 61 cm (24 in.) for service access Sides 30.5 cm (12 in.) for service, operator access, and cooling; roll library out to access the bulk load access door wall Bulk load access Back Mailslot Front Mailslot Front 2-3