HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 93
Run Inventory, Inventory Check
View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Library Operation Troubleshooting Table 4-14 Troubleshooting (Continued) Problem Solution RUN INVENTORY displays. Cannot write to the tape. Cannot read the tape. • Power cycle the library by pressing the power switch off and then on again. • Run the INVENTORY CHECK test under the TEST* menu. • Check the host file system access permissions. • Check the write-protect tab on the cartridge to ensure write-enabled status. • Check the application software. • Check the host file system access permissions. • Verify that the correct tape type is being used (See Setting a Configuration Option" on page 4-27.) • Check the application software. Library Operation 4-49
4-49
Library Operation
Troubleshooting
Library Operation
RUN INVENTORY
displays.
•
Power cycle the library by pressing the power switch off and
then on again.
•
Run the
INVENTORY CHECK
test under the
TEST*
menu.
Cannot write to the tape.
•
Check the host file system access permissions.
•
Check the write-protect tab on the cartridge to ensure
write-enabled status.
•
Check the application software.
Cannot read the tape.
•
Check the host file system access permissions.
•
Verify that the correct tape type is being used (See Setting a
Configuration Option” on page 4-27.)
•
Check the application software.
Table 4-14
Troubleshooting (Continued)
Problem
Solution