HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 83

MB * MF * MS 0, Table 4-10, Tests Available from the Control Panel, Continued

Get HP Surestore Tape Library Model 4/48 PDF manuals and user guides View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Library Operation Running an Internal Test Table 4-10 Test Name SENSOR TRANSLATE SENSORS MAILSLOT SENSORS STARWARS VERTICAL ENCODER Tests Available from the Control Panel (Continued) Description Tests the horizontal path that the cartridge transport mechanism follows when moving from one stack of tape cartridges to another. Displays on or off. If off displays, the path is blocked. (This display is automatically updated if the sensor status changes.) Requires use of one tape cartridge. When the mailslot is empty and flush with the side panel, either of the following displays: MB * MF * MS 0 MB 0 MF * MS 0 When the mailslot contains a cartridge that is correctly inserted and ready to be loaded, either of the following displays: MB 0 MF * MS 0 MB 0 MF 0 MS 0 While the cartridge is being loaded, the "MS" status toggles between 0 and *. Press CANCEL to rotate the mailslot out and remove the cartridge. 0 0 displays. Each 0 indicates one path that the cartridge transport mechanism follows in front of each stack of tape cartridges: If the path is clear, 0 displays. If the path is blocked (for example, because a cartridge is not inserted fully into its storage slot), * displays. This display updates automatically if the sensor status changes. Moves the cartridge transport mechanism down, back up a short distance, then back down. The last time the transport mechanism is moved down the number of encoder counts is verified. Returns PASS/FAIL. No tape cartridges are required. Library Operation 4-39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
4-39
Library Operation
Running an Internal Test
Library Operation
SENSOR
TRANSLATE
Tests the horizontal path that the cartridge transport mechanism follows when
moving from one stack of tape cartridges to another. Displays on or off. If off
displays, the path is blocked. (This display is automatically updated if the sensor
status changes.) Requires use of one tape cartridge.
SENSORS
MAILSLOT
When the mailslot is empty and flush with the side panel, either of the
following displays:
MB * MF * MS 0
MB 0 MF * MS 0
When the mailslot contains a cartridge that is correctly inserted and ready
to be loaded, either of the following displays:
MB 0 MF * MS 0
MB 0 MF 0 MS 0
While the cartridge is being loaded, the “MS” status toggles between
0
and
*
.
Press
CANCEL
to rotate the mailslot out and remove the cartridge.
SENSORS
STARWARS
0
0
displays.
Each
0
indicates one path that the cartridge transport mechanism follows
in front of each stack of tape cartridges:
If the path is clear,
0
displays.
If the path is blocked (for example, because a cartridge is not inserted
fully into its storage slot),
*
displays.
This display updates automatically if the sensor status changes.
VERTICAL
ENCODER
Moves the cartridge transport mechanism down, back up a short distance,
then back down. The last time the transport mechanism is moved down
the number of encoder counts is verified. Returns PASS/FAIL. No tape
cartridges are required.
Table 4-10
Tests Available from the Control Panel
(Continued)
Test Name
Description