HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 52
Setting a New Administration Menu, Password, CONFIG, NEW PASSWORD, NEW 000-000-000, PASSWORD CHANGED
View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
NOTE NOTE Library Operation Setting a New Administration Menu Password Setting a New Administration Menu Password 1 2 3 4 ADMIN* PSWD 000-000-000 CONFIG* NEW PASSWORD Do not forget the password. Only an HP qualified service representative can reset the security code to the factory setting. To set a new password: 1. Follow the steps on the previous page to enter the existing or factory-set password. 2. Press NEXT until CONFIG* displays, then press ENTER. 3. Press NEXT or PREV until NEW PASSWORD displays, then press ENTER. 4. NEW 000-000-000 displays, and the first set of zeros flashes. Press NEXT or PREV until the desired number for the first part of the password displays, then press ENTER. 5. The second set of zeros flashes. Press NEXT or PREV until the desired number for the second part of the password displays, then press ENTER. 6. The last set of zeros flashes. Press NEXT or PREV until the desired number for the third part of the password displays, then press ENTER. 7. PASSWORD CHANGED displays. Press CANCEL three times to return to the drive status ("ready" state). Save the new password to flash ROM by power cycling the library (turning the library off and then on). This allows the password to be recovered if the library is powered off for more than ten days. 4-8