HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 61

Loading Cartridges Through the Bulk Load, Access Door, RELEASE DOOR, DOOR RELEASED, READY

Get HP Surestore Tape Library Model 4/48 PDF manuals and user guides View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

NOTE Figure 4-4 Library Operation Loading Cartridges Into the Library Loading Cartridges Through the Bulk Load Access Door 1. Verify that the drive status displays (if not, press CANCEL until it does). 2. Verify that the drives are all empty ( displays after the drive number). If the drives are full, use the mailslot to load tapes. Some software packages require that cartridges be inserted and removed using the software. If a software package manages files in the library, check the software documentation before proceeding. 3. Press NEXT until RELEASE DOOR displays, then press ENTER. 4. DOOR RELEASED, READY, and DRIVE STATUS each display briefly, then the drive status displays. 5. Unlock the bulk load access door using the key. 6. Open the top of the door, then lift it out (see Figure 4-4). Loading Tape Cartridges Through the Bulk Load Access Door Library Operation 4-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
4-17
Library Operation
Loading Cartridges Into the Library
Library Operation
Loading Cartridges Through the Bulk Load
Access Door
1.
Verify that the drive status displays (if not, press
CANCEL
until it does).
2.
Verify that the drives are all empty (
displays after the drive number).
If
the drives are full, use the mailslot to load tapes
.
NOTE
Some software packages require that cartridges be inserted and removed
using the software. If a software package manages files in the library, check
the software documentation before proceeding.
3.
Press
NEXT
until
RELEASE DOOR
displays, then press
ENTER
.
4.
DOOR RELEASED
,
READY
, and
DRIVE STATUS
each display briefly, then
the drive status displays.
5.
Unlock the bulk load access door using the key.
6.
Open the top of the door, then lift it out (see Figure 4-4).
Figure 4-4
Loading Tape Cartridges Through the Bulk Load Access Door