HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 42
Labeling Tape Cartridges, Proper Label Position
View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Tape Cartridges Labeling Tape Cartridges NOTE Figure 3-1 Labeling Tape Cartridges Make it a practice to use bar code labels on the tape cartridges. The host software may need to keep track of the following information and the associated bar code: • date of format or initialization • cartridge owner (such as group or department) • storage purpose (such as backup, old version of operating system) If the host software does not keep track of this information, create a method of doing so. Slide the label into the slot on the face of the cartridge as illustrated in Figure 3-1. If bar code labels are not used and the Barcode On/Off configuration is set to On, the Inventory Check test performance can be significantly impacted. This test runs when the library is powered on and whenever the bulk load access door is used. See Appendix A for information about ordering additional bar code labels. Proper Label Position 3-4