HP T5735 Troubleshooting Guide: HP t5730 and t5735 Thin Client - Page 15

Hardware Changes, General Hardware Installation Sequence

Get HP T5735 - Compaq Thin Client PDF manuals and user guides
UPC - 883585606238
View all HP T5735 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

2 Hardware Changes General Hardware Installation Sequence To ensure the proper installation thin client hardware components: 1. Back up any data, if necessary. 2. If the thin client is powered on: a. Turn the unit and any other attached devices off. b. Disconnect the power cord from the wall outlet. c. Disconnect any external devices or cables, such as an antenna or cable lock. WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet and allow the internal system components to cool before touching. WARNING! To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the network interface controller (NIC) receptacles. CAUTION: Static electricity can damage the electronic components of the thin client or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. 3. Remove the secure USB compartment cover. See Removing and Replacing the Secure USB Compartment Cover on page 8 for more information. 4. Remove the side access panel and metal side cover. See Removing and Replacing the Side Access Panel and Metal Side Cover on page 10 for more information. 5. Remove any hardware that you will replace. 6. Install or replace equipment. For removal and replacement procedures, see the following sections: ● Installing the USB Device on page 9 ● Removing and Replacing the Battery on page 12 NOTE: Option kits include more detailed installation instructions. 7. Replace the side access panel and metal side cover. See Removing and Replacing the Side Access Panel and Metal Side Cover on page 10. General Hardware Installation Sequence 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
2
Hardware Changes
General Hardware Installation Sequence
To ensure the proper installation thin client hardware components:
1.
Back up any data, if necessary.
2.
If the thin client is powered on:
a.
Turn the unit and any other attached devices off.
b.
Disconnect the power cord from the wall outlet.
c.
Disconnect any external devices or cables, such as an antenna or cable lock.
WARNING!
To reduce the risk of personal injury from electrical shock and/or hot surfaces, be
sure to disconnect the power cord from the wall outlet and allow the internal system components
to cool before touching.
WARNING!
To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug
telecommunications or telephone connectors into the network interface controller (NIC)
receptacles.
CAUTION:
Static electricity can damage the electronic components of the thin client or optional
equipment. Before beginning these procedures, ensure that you are discharged of static electricity
by briefly touching a grounded metal object.
3.
Remove the secure USB compartment cover. See
Removing and Replacing the Secure USB
Compartment Cover
on page
8
for more information.
4.
Remove the side access panel and metal side cover. See
Removing and Replacing the Side
Access Panel and Metal Side Cover
on page
10
for more information.
5.
Remove any hardware that you will replace.
6.
Install or replace equipment. For removal and replacement procedures, see the following
sections:
●
Installing the USB Device
on page
9
●
Removing and Replacing the Battery
on page
12
NOTE:
Option kits include more detailed installation instructions.
7.
Replace the side access panel and metal side cover. See
Removing and Replacing the Side
Access Panel and Metal Side Cover
on page
10
.
General Hardware Installation Sequence
7