HP T5735 Troubleshooting Guide: HP t5730 and t5735 Thin Client - Page 22
Connecting the HP Quick Release to another device
UPC - 883585606238
View all HP T5735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To use the HP Quick Release with a VESA-configured thin client: 1. Using four 10 mm screws included in the mounting device kit, attach one side of the HP Quick Release to the thin client as shown in the following illustration. Figure 3-2 Connecting the HP Quick Release to the thin client 2. Using four screws included in the mounting device kit, attach the other side of the HP Quick Release to the device to which you will mount the thin client. Make sure the release lever points upward. Figure 3-3 Connecting the HP Quick Release to another device 14 Chapter 3 Mounting the Thin Client
To use the HP Quick Release with a VESA-configured thin client:
1.
Using four 10 mm screws included in the mounting device kit, attach one side of the HP Quick
Release to the thin client as shown in the following illustration.
Figure 3-2
Connecting the HP Quick Release to the thin client
2.
Using four screws included in the mounting device kit, attach the other side of the HP Quick Release
to the device to which you will mount the thin client. Make sure the release lever points upward.
Figure 3-3
Connecting the HP Quick Release to another device
14
Chapter 3
Mounting the Thin Client