HP T5735 Troubleshooting Guide: HP t5730 and t5735 Thin Client - Page 18
Removing and Replacing the Side Access Panel and Metal Side Cover
UPC - 883585606238
View all HP T5735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3. Replace the screw (3). 4. Replace the antenna, if you are using one. Removing and Replacing the Side Access Panel and Metal Side Cover Removing the Side Access Panel and Metal Side Cover WARNING! Before removing the side access panel, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet. To remove the access panel: 1. Remove the secure compartment cover (1). For more information, see Removing the Secure USB Compartment Cover on page 8. 2. Remove the access panel screw in the secure USB compartment that secures the access panel to the chassis (2). 3. Slide the access panel about 6.35 mm (1/4 inch) toward the rear of the unit (3), and then lift the access panel up and off the unit (4). To remove the metal side cover: 10 Chapter 2 Hardware Changes