HP Tc2100 HP Server Novell NetWare Installation Guide (including v 6.5) - Page 4

Installing NetWare on the HP NetServer, Netware 4.2 Installation

Get HP Tc2100 - Server - 128 MB RAM PDF manuals and user guides View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Copy A:\CDROMDRV\IDEDOS\*.* C:\directoryname 8. Use the edit utility to add the following lines to your CONFIG.SYS file: DEVICE=C:\directoryname\FDATACD.SYS /D:driver1 Where directoryname is the path to the directory containing the FDATACD.SYS driver, and driver1 specifies the driver signature name of the first CD-ROM device driver. The driver signature name must have fewer than eight characters, for example: DEVICE=C:\DOSCDROM\FDATACD.SYS /D:HPCD000 NOTE: The MSCDEX driver is included with MS-DOS/Windows version 6.0 or later. The MSCDEX driver also supports a driver signature parameter (for example, /D:driver1). The name used for this parameter must match the name used for the FDATACD.SYS driver signature parameter. 9. Use the DOS edit utility to add the following line to your AUTOEXEC.BAT file: C:\DOS\MSCDEX /D:driver1 /L:logical drive letter For example, if C:\DOS\MSCDEX.EX /D:HPCD000 /L:E is used, the CD-ROM drive is assigned to the DOS logical drive E: If you do not use option /L:E, the system will automatically assign a DOS logical drive for the CD-ROM drive. 10. Power down your HP NetServer. Section 4. Installing NetWare on the HP NetServer This section details how to install SCSI, NIC, and HP NetRAID drivers from the NOS Drivers Diskette created from the HP Navigator CD-ROM detailed in the section Creating Drivers Diskette. Netware 4.2 Installation NOTE: Netware 4.2 installations with 4 GB of memory are known to fail intermittently. If you have 4 GB of memory in your system, install Netware 4.2 using 3 GB of memory. Then after installation reinstall remaining memory. NOTE: At least a 250 MB DOS partition must already exist on your hard drive and your CD-ROM drive should be accessible. For detailed instructions refer to Installing the CD-ROM Drive in DOS with FDATACD.SYS and MSCDEX.EXE. 1. Remove the HP NetServer Navigator CD-ROM and any floppy diskettes from the A: drive and insert the Novell Netware 4.2 Installation CD into the CD-ROM drive.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
Copy A:\CDROMDRV\IDEDOS\*.* C:\
directoryname
8. Use the
edit
utility to add the following lines to your
CONFIG.SYS
file:
DEVICE=C:\
directoryname
\FDATACD.SYS /D:
driver1
Where
directoryname
is the path to the directory containing the FDATACD.SYS
driver, and
driver1
specifies the driver signature name of the first CD-ROM device
driver. The driver signature name must have fewer than eight characters, for example:
DEVICE=C:\DOSCDROM\FDATACD.SYS /D:HPCD000
NOTE: The MSCDEX driver is included with MS-DOS/Windows version 6.0 or
later. The MSCDEX driver also supports a driver signature parameter (for
example, /D:driver1). The name used for this parameter must match the name
used for the FDATACD.SYS driver signature parameter.
9. Use the DOS
edit
utility to add the following line to your
AUTOEXEC.BAT
file:
C:\DOS\MSCDEX /D:
driver1
/L:
logical drive letter
For example, if C:\DOS\MSCDEX.EX /D:HPCD000 /L:E is used, the CD-ROM
drive is assigned to the DOS logical drive E: If you do not use option /L:E, the system
will automatically assign a DOS logical drive for the CD-ROM drive.
10. Power down your HP NetServer.
Section 4. Installing NetWare on the HP NetServer
This section details how to install SCSI, NIC, and HP NetRAID drivers from the NOS
Drivers Diskette created from the HP Navigator CD-ROM detailed in the section
Creating Drivers Diskette.
Netware 4.2 Installation
NOTE: Netware 4.2 installations with 4 GB of memory are known to fail
intermittently.
If you have 4 GB of memory in your system, install Netware 4.2
using 3 GB of memory. Then after installation reinstall remaining memory.
NOTE: At least a 250 MB DOS partition must already exist on your hard drive
and your CD-ROM drive should be accessible. For detailed instructions refer to
Installing the CD-ROM Drive in DOS with FDATACD.SYS and MSCDEX.EXE
.
1.
Remove the HP NetServer Navigator CD-ROM and any floppy diskettes from the A:
drive and insert the Novell Netware 4.2 Installation CD into the CD-ROM drive.