HP Tc2100 HP Server Novell NetWare Installation Guide (including v 6.5) - Page 8

The HP NetRAID-1Si and NetRAID-3Si adapters can operate in either I2O or non-I2O - driver server

Get HP Tc2100 - Server - 128 MB RAM PDF manuals and user guides View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

NOTE: Refer to the Novell Netware 4.2 installation procedures for all other installation issues. After completing the installation of Netware 4.2, you must install the latest support pack from Novell. This can be downloaded from: http://support.novell.com Installing the SMP driver MPS14.PSM for Netware 4.2 The Netware 4.2 installation program no longer auto-detects more than one CPU and asks the user if they wish to install SMP. SMP installation is now performed from the "install" utility after the initial installation of Netware 4.2. The installation program will attempt to add an older version of the SMP driver. The correct SMP driver is located on the Netware 4.2 NOS driver diskette you created from the NetServer Navigator CD in the a:\psm directory or will be loaded automatically with the installation of Support Pack 7 or later. Installing the NetRAID-1Si / NetRAID-3Si I2O driver on Netware 4.2 The HP NetRAID-1Si and NetRAID-3Si adapters can operate in either I2O or non-I2O (traditional) mode. To configure the adapter to operate I2O mode use the NetRAID Express Tools (version B.02.02 or later) that came with your NetRAID adapter or on the NetServer Navigator CD. The I2O drivers are located on the Netware 4.2 NOS drivers diskette in the \i2odac directory. NOTE: I20 functionality is not supported on NetServer E series systems. 1. After the server installation process is complete, enter the commands: DOWN and press Enter. Followed by: EXIT and press Enter. 2. While in DOS copy the following files from the Netware 4.2 NOS drivers diskette directory \i2odac to C:\NWSERVER: IOPX.* I2OPCI.* BKSTROSM.* SCSIOSM.*. 3. Then, while still in DOS, edit the STARTUP.NCF file and add the following lines:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
NOTE: Refer to the Novell Netware 4.2 installation procedures for all other
installation issues. After completing the installation of Netware 4.2, you must
install the latest support pack from Novell. This can be downloaded from:
Installing the SMP driver MPS14.PSM for Netware 4.2
The Netware 4.2 installation program no longer auto-detects more than one CPU and asks
the user if they wish to install SMP. SMP installation is now performed from the "install"
utility after the initial installation of Netware 4.2.
The installation program will attempt to add an older version of the SMP driver. The
correct SMP driver is located on the Netware 4.2 NOS driver diskette you created from
the NetServer Navigator CD in the
a:\psm
directory or will be loaded automatically with
the installation of Support Pack 7 or later.
Installing the NetRAID-1Si / NetRAID-3Si I2O driver on Netware 4.2
The HP NetRAID-1Si and NetRAID-3Si adapters can operate in either I2O or non-I2O
(traditional) mode. To configure the adapter to operate I2O mode use the
NetRAID
Express Tools
(version B.02.02 or later) that came with your NetRAID adapter or on the
NetServer Navigator CD. The I2O drivers are located on the Netware 4.2 NOS drivers
diskette in the
\i2odac
directory.
NOTE: I20 functionality is
not
supported on NetServer E series systems.
1.
After the server installation process is complete, enter the commands:
DOWN
and press
Enter
. Followed by:
EXIT
and press
Enter
.
2.
While in DOS copy the following files from the Netware 4.2 NOS drivers diskette
directory
\i2odac
to
C:\NWSERVER:
IOPX.*
I2OPCI.*
BKSTROSM.*
SCSIOSM.*
.
3.
Then, while still in DOS, edit the
STARTUP.NCF
file and add the following lines: