HP VL600 HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50
HP VL600 - Vectra - 128 MB RAM Manual
 |
View all HP VL600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP VL600 manual content summary:
- HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 1
3COM Etherlink III 3C509-B Ethernet Adapter Installation Guide - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 2
written consent of Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. MMXTM is a trademark of Intel Corporation. Pentium® is a registered trademark of Intel Corporation. Hewlett-Packard France Commercial Desktop Computing Division 38053 - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 3
EtherLink III 3C509B adapter 3 Connecting to a Novell NetWare 5.0 Server 4 Microsoft Windows 95 SR2.5 Requirements 4 Device Configuration 4 Procedure 4 Connecting to a Windows NT 4.0 Server 6 Microsoft Windows 95 SR2.5 Requirements 6 Device Configuration 6 Procedure 6 Connecting to a Novell - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 4
Procedure 15 Connecting to a Novell NetWare 5.0 Server 18 Microsoft Windows 98 2nd edition Requirements 18 Device Configuration 18 Procedure 18 Known Problems 20 Connecting to a Windows NT 4.0 Server 21 Microsoft Windows 98 2nd edition Requirements 21 Device Configuration 21 Procedure 21 - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 5
only if needed and only if you are an advanced user. • Under BIOS setup, go to Advanced > ISA IRQ Resource Exclusion > re- serve an IRQ for the adapter. • Start the configuration tool, 3C5X9CFG.EXE, provided in driver kit (see install documentation). Using the utility, disable the adapter's Plug and - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 6
on "OK". 4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Restart the system. 8 Windows 95 will detect the network adapter as "3Com 3C509B EtherLink - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 7
drive containing the driver disk and click on "OK". 12 At the "3COM Installation Wizard" window, select "Express Installation", "Custom Installation", or "Skip the 3COM Installation Wizard" and click on "Next" (Express Installation is typical). If you do not have a DHCP server on your network, or if - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 8
on "OK". 4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Restart the system. 8 Windows 95 will detect the network adapter as "3Com 3C509B EtherLink - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 9
drive containing the driver disk and click on "OK". 12 At the "3COM Installation Wizard" window, select "Express Installation", "Custom Installation", or "Skip the 3COM Installation Wizard" and click on "Next" (Express Installation is typical). If you do not have a DHCP server on your network, or if - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 10
on "OK". 4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Restart the system. 8 Windows 95 will detect the network adapter as "3Com 3C509B EtherLink - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 11
drive containing the driver disk and click on "OK". 12 At the "3COM Installation Wizard" window, select "Express Installation", "Custom Installation", or "Skip the 3COM Installation Wizard" and click on "Next" (Express Installation is typical). If you do not have a DHCP server on your network, or if - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 12
300-30F 11 210-21F Procedure 1 With the HP Vectra turned off, install the network adapter into an ISA slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows NT. 4 Log into Windows NT with administrator privileges. 5 The following steps - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 13
NT is now ready to start the network..." window appears, click on "Next". 20 Specify your Computer Name, Workgroup or Domain Name and click on Next". 21 Click on "Finish" when the "Network has been installed on this computer" message appears. 22 Remove the driver disk and select "No" when prompted - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 14
Microsoft Windows NT 4.0 Workstation 29 Select either "Typical" or "Custom" and click on "Install". Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administrator - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 15
Driver File Server OS Client OS Windows NT 4.0 Workstation 5.26.45 Elnk3nd4.sys Windows NT 4.0 Server Microsoft Device Configuration Device Configuration Interrupt I/O Address Configuration 1 Configuration 2 5 300-30F 11 210-21F Procedure 1 With the HP Vectra turned off, install the network - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 16
NT is now ready to start the network..." window appears, click on "Next". 20 Specify your Computer Name, Workgroup or Domain Name and click on Next". 21 Click on "Finish" when the "Network has been installed on this computer" message appears. 22 Remove the driver disk and select "No" when prompted - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 17
300-30F 11 210-21F Procedure 1 With the HP Vectra turned off, install the network adapter into an ISA slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows NT. 4 Log into Windows NT with administrator privileges. 5 The following steps - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 18
NT is now ready to start the network..." window appears, click on "Next". 20 Specify your Computer Name, Workgroup or Domain Name and click on Next". 21 Click on "Finish" when the "Network has been installed on this computer" message appears. 22 Remove the driver disk and select "No" when prompted - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 19
Microsoft Windows NT 4.0 Workstation 29 Select either "Typical" or "Custom" and click on "Install". Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administrator - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 20
4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Power on the machine and boot to Windows 98. 8 Windows 98 will detect the network adapter as "3Com - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 21
disk drives" and click "Next". 12 Select "The updated driver (Recommended) 3Com EtherLink 10 ISA TPO (3C509b-TPO) in PnP mode" and click "Next". 13 Click on "Next" to continue with the installation. 14 Click on "OK" when Windows prompts for the driver disk. 15 Type in the location of the floppy - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 22
Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2nd edition Known Problems Problem1 After running PREINST.EXE, a message indicating "A Plug and Play BIOS was not detected in your computer!" comes up. This message can be safely ignored. There is no known fix to this problem. 20 - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 23
4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Power on the machine and boot to Windows 98. 8 Windows 98 will detect the network adapter as "3Com - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 24
disk drives" and click "Next". 12 Select "The updated driver (Recommended) 3Com EtherLink 10 ISA TPO (3C509b-TPO) in PnP mode" and click "Next". 13 Click on "Next" to continue with the installation. 14 Click on "OK" when Windows prompts for the driver disk. 15 Type in the location of the floppy - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 25
4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Power on the machine and boot to Windows 98. 8 Windows 98 will detect the network adapter as "3Com - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 26
disk drives" and click "Next". 12 Select "The updated driver (Recommended) 3Com EtherLink 10 ISA TPO (3C509b-TPO) in PNP mode" and click "Next". 13 Click on "Next" to continue with the installation. 14 Click on "OK" when Windows prompts for the driver disk. 15 Type in the location of the floppy - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 27
Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2nd edition Known Problems Problem1 After running PREINST.EXE, a message indicating "A Plug and Play BIOS was not detected in your computer!" comes up. This message can be safely ignored. There is no known fix to this problem. 25 - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 28
Driver File Server OS Client OS Windows for Workgroups 3.11 3.11 Elnk3.386 Windows NT 4.0 Server Microsoft Device Configuration Device Configuration Interrupt I/O Address Configuration 1 Configuration 2 5 210-21F 11 300-30F Procedure 1 With the HP Vectra turned off, install the network - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 29
NT 4.0 Server Microsoft Windows for Workgroups v3.11 10 Insert the driver disk and type the path to the drivers in the "Install Driver" dialog box and click "OK". 11 Click "OK" to accept the default choice of "3Com EtherLink 10 ISA (3C509b)". 12 Accept the applicable network protocols, and then - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 30
2 5 210-21F 11 300-30F Procedure 1 With the HP Vectra turned off, install the network adapter into an ISA slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and start in MS-DOS mode. 4 Start Windows for Workgroups. 5 From the location of the "NetWare - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 31
to use and click "Next". 19 When the installation is completed, remove the driver disk and click on "Finish" and restart the computer. 20 You may login to a server from the DOS prompt or load Windows for Workgroups v3.11 and use the "NetWare User Tools" from the "Novell Client" folder to login to - HP VL600 | HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 32
Version Number 2 December 1999
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
3COM Etherlink III 3C509-B
Ethernet Adapter
Installation Guide