HP VL600 HP Vectra VL600, 3 COM Etherlink III ISA 10BT Ethernet Adapter (3C50 - Page 8
Connecting to a Windows NT 4.0 Server - vectra computer
View all HP VL600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting to a Windows NT 4.0 Server Microsoft Windows 95 SR2.5 3 Connecting to a Windows NT 4.0 Server Microsoft Windows 95 Requirements SR2.5 Operating System Driver Version Driver File Server OS Client OS Windows 95 SR2.5 5.26.45 Elnk3nd4.sys Windows NT 4.0 Server Microsoft Device Configuration Device Configuration Interrupt I/O Address Configuration 1 Configuration 2 5 210-21F 11 300-30F Procedure 1 Power on the machine and boot to Windows 95. 2 Insert the driver disk and execute "PREINSTL.EXE". 3 Accept the default values by clicking on "OK". 4 Remove the driver disk and shut down the system. 5 With the HP Vectra turned off, install the network adapter into an ISA slot. 6 Connect the network cable to the newly installed network adapter. 7 Restart the system. 8 Windows 95 will detect the network adapter as "3Com 3C509B EtherLink III" during start up. 9 Insert the driver disk and click on "Next" to continue the installation. 10 Click on "Finish" to complete driver update. 6