HP Vectra VEi8 HP Vectra VEi7, Madge Smart 16/4 PCI Token Ring Adapter, Instal - Page 17

7 Installing the Madge Smart 16/4 Token Ring PCI Adapter Microsoft Windows NT 4.0 Workstation 7 Installing the Madge Smart 16/4 Token Ring PCI Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Novell NetWare 3.12 Server Requirements • HP Vectra with Windows NT4.0 Workstation. • Madge Smart 16/4 PCI TR Ringnode (BM) 2 adapter and driver disk ver- sion 5.0(2). • Driver File: MDGMPORT.SYS, version 2.21 • Microsoft Windows NT4.0 Workstation media. • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Madge Smart 16/4 Token-Ring PCI adapter into a PCI slot. 2 Connect network cable media to the Madge Smart Token-Ring PCI card. 3 Log into Windows NT with administrator privileges. 4 Open the "Network Properties" window and agree to install "Windows NT Networking". 5 With "Wired to the Network" checked, click on "Next". 6 Click on the option to "Select from list" then on "Have Disk". 7 Insert the Madge Token-Ring PCI driver disk 2 of 2 into the floppy drive. 8 Select "Madge Smart 16/4 PCI Ringnode" in the "Select OEM Option" dialog box, and click "OK".