HP Vectra VEi8 HP Vectra VEi7, Madge Smart 16/4 PCI Token Ring Adapter, Instal - Page 5
Installing the Madge Smart 16/4 PCI Token Ring Adapter
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 Installing the Madge Smart 16/4 PCI Token Ring Adapter Microsoft Windows 95 SR2.5 1 Installing the Madge Smart 16/4 PCI Token Ring Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows 95 SR2.5. • Madge Smart 16/4 PCI TR Ringnode (BM) 2 adapter and drivers disk version 5.0(2). • Driver File: MDGMPORT.SYS, version 2.21 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Madge Smart 16/4 PCI Token Ring card into a PCI slot. 2 Connect network cable media to the Madge Smart 16/4 PCI Token Ring card. 3 Power on the system and boot to Windows 95SR2.5. 4 Upon booting, Windows 95 will automatically recognize the adapter. Click on "Next". 5 When prompted, click on "Other Locations". 6 Insert driver disk 2 of 2, set the path to "A:\" and click "OK". 7 Verify that "Madge Smart 16/4 PCI Ringnode (BM) 2" is listed and click on "Finish". 8 Enter your Computer Name, Workgroup Name, Computer Description, and click on "Close".