HP Vectra VEi8 HP Vectra VEi7, Madge Smart 16/4 PCI Token Ring Adapter, Instal - Page 7

2 Installing the Madge Smart 16/4 PCI Token Ring Adapter Microsoft Windows 95 SR2.5 2 Installing the Madge Smart 16/4 PCI Token Ring Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • Madge Smart 16/4 PCI TR Ringnode (BM) 2 adapter and drivers disk version 5.0(2). • Driver File: MDGMPORT.SYS, version 2.21 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Madge Smart 16/4 PCI TR adapter into a PCI slot. 2 Connect network cable media to the Madge Smart 16/4 PCI TR adapter. 3 Power on the machine and start Windows 95SR2.5 and the Token Ring card will be automatically recognized. Insert the Madge Smart 16/4 PCI TR adapter driver disk and click on "Next". 4 Verify that "Madge Smart 16/4 PCI Token Ring adapter" is listed and click on "Finish". 5 Click on "OK" when the system prompts for the computer and workgroup names. 6 Enter the Computer Name, Workgroup, and Computer Description in the appropriate spaces and click on "Close" (Contact your network administrator if you do not have the required information). 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click "OK".