HP Vectra VEi8 HP Vectra VEi7, Madge Smart 16/4 PCI Token Ring Adapter, Instal - Page 27

12 Installing the Madge Smart 16/4 Token Ring PCI Adapter Microsoft Windows for Workgroups 3.11 12 Installing the Madge Smart 16/4 Token Ring PCI Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Microsoft Windows NT4.0 Server Requirements • Microsoft Windows for Workgroups 3.11. • Madge Smart 16/4 PCI TR Ringnode (BM) 2 adapter and driver disk ver- sion 5.0(2). • Driver File: MDGND.DOS, version 3.12 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1400 Vectra VEi7 03 D800 Vectra VEi8 02 E400 Procedure 1 With the HP Vectra turned off, install the Madge Smart 16/4 Token-Ring PCI adapter into a PCI slot. 2 Connect network cable media to the Madge Smart 16/4 Token-Ring PCI card. 3 Power on the machine and run Windows. 4 After Windows loads, open the "NETWORK" folder, and double click the "NETWORK SETUP" icon. 5 Select "Networks" and click on "Install Microsoft Windows Network" then hit Enter. 6 Click on "Drivers" then on "Add Adapter". 7 Accept "Unlisted or Updated Network Adapter" and hit Enter. 8 Insert Madge driver disk, set the path to "A:\DOS" and click on OK. 9 Select "Madge Smart 16/4 PCI (BM) Ringnode" and click on "OK".