HP Vectra VL 5/xxx HP Vectra VL/VE 5/xx Series 3 PC - Familiarization Guide - Page 48

Flexible Disk Drives: Drive 1 Drive 2 Bootable Drive Interface Security Features: System Administrator Password (HP Vectra VL 5/xx only) Start with Keyboard Locked Start From Flexible Disk Start From Hard Disk Flexible Disk Drives Hard Disk Drives Writing on Flexible Disks Parallel Port Parallel Port Mode Serial Port A Serial Port B Video Primary Adapter Video BIOS Shadowing VGA Enhanced/ Ergonomic Modes Defines the first and second flexible disk drives. Define which flexible disk drive is the bootable drive. To define if the flexible disk drive controller is integrated. Keyboard locked until Password is entered. Select which video adapter mode is used by the integrated video controller. Enables or disables the copying of the video BIOS on ISA video boards into RAM. Select ergonomic refresh rates. None, 3.5-inch 1.44 MB, or 5.25-inch 1.2 MB Drive 1/Drive 2 Integrated/ Controller board Set/Not Set Enabled/Disabled Enabled/Disabled Enabled/Disabled Enabled/Disabled Enabled/Disabled Select a combination of I/O address and IRQ channel. Centronics, ECP, or EPP. Select a combination of I/O address and IRQ channel. EGA/VGA or similar, Monochrome, CGA/ Multimode 80, CGA/ Multimode 40 Enabled/Disabled Different refresh rates may be selected for different screen resolutions. Configure any controller board according to its manual. Enable when the PC is used as a Network Server. Disable the parallel port to resolve an address conflict, prevent access to your system, or free an IRQ or I/O resource. Disable a serial port to resolve an address conflict, prevent access to your system, or free an IRQ or I/O resource. VL5/xx & VE5/xx Familiarization Guide Troubleshooting and Repair • 48