HP Vectra VL800 hp vectra vl800, troubleshooting guide - Page 31
Troubleshooting BIOS Problems, Updating the BIOS, Restoring BIOS Default Settings
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 Use or Configuration Problems Troubleshooting BIOS Problems Troubleshooting BIOS Problems The BIOS is a set of program routines that gives the PC its fundamental operational characteristics. Many problems with your PC can be solved by updating (flashing) the BIOS (Basic Input Output System). NOTE It is recommended that before you make any modifications to the BIOS you take note of the system setup. Updating the BIOS The latest system BIOS (standard flash operation) for your PC can be downloaded from HP's Support Web site at: www.hp.com/go/vectrasupport. Instructions on updating the BIOS are supplied with the downloaded BIOS files and a BIOS flash utility. Restoring BIOS Default Settings Suspected hardware errors may be caused by BIOS and configuration issues. If the BIOS settings are suspected to be wrong, do the following steps to restore the BIOS to its default setting: 1 Press F2 while the initial HP logo is displayed immediately after restarting the PC to access the Setup program. 2 Press F9 to load the default settings from the Setup program. 3 Set the "Reset Configuration Data" to Yes in the Main menu. It is recommended that before you make any modifications to the BIOS you take note of the system setup. 31