HP Vectra XE310 hp vectra xe310, upgrade guide - Page 12
Removing and Replacing the Side Panel & Air Flow Guide
View all HP Vectra XE310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Upgrading and Replacing PC Hardware Removing and Replacing the Side Panel & Air Flow Guide WARNING For your safety, disconnect the power cord and all external cables. 1 Place the PC on a flat surface and stand behind it. 2 Disconnect all cables from the rear of the PC. 3 Undo the two thumb screws on the back of the PC then slide back and lift off the side panel. Thumb screw Thumb screw 4 Push down on the two clips, ease the airflow guide backwards and lift off. 5 Reverse the process described in Steps 2 to 4 to replace the side panel and air flow guide. 12
Upgrading and Replacing PC Hardware
Removing and Replacing the Side Panel & Air Flow Guide
WARNING
For your safety, disconnect the power cord and all external cables.
1
Place the PC on a flat surface and stand behind it.±
2
Disconnect all cables from the rear of the PC.±
3
Undo the two thumb screws on the back of the PC then slide back and lift off the side panel.±
Thumb
screw
Thumb
screw
4
Push down on the two clips, ease the airflow guide backwards and lift off.
5
Reverse the process described in Steps 2 to 4 to replace the side panel and air flow guide.
12±