HP Vectra XE310 hp vectra xe310, upgrade guide - Page 14
Installing an Expansion Card, Replacing the Side Panel & Air Flow Guide
![]() |
View all HP Vectra XE310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Upgrading and Replacing PC Hardware Installing an Expansion Card Note For your safety, disconnect the power cord and all external cables. 1 Switch off the PC, disconnect the power cord and remove the PC's side panel (refer to "Removing and Replacing the Side Panel & Air Flow Guide" on page 12). 2 Locate the slot you want to use. • If fitting a card in an empty slot, undo the screw holding the slot cover in place and remove it. • If replacing a card in an expansion slot, undo the screw holding the card in place and lift it out. 3 Aligning the new card carefully, press it firmly into the socket and tighten the retaining screw. 4 Replace the PC's side panel (refer to "Removing and Replacing the Side Panel & Air Flow Guide" on page 12). 5 Reconnect the power cord. 14
![](/manual_guide/products/hewlettpackard-vectra-xe310-hp-vectra-xe310-upgrade-guide-3315429/14.png)