HP Vectra XU 5/XX HP Vectra XU PC Series - Setting Up Guide - Page 35
Completing the Installation Procedure
View all HP Vectra XU 5/XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Ensure the cover lock is unlocked. 4. Align the back of the cover so it is 5 cm (2 inches) from the back of the PC. 5. Lower the cover onto the PC, and firmly slide it into position. 6. Clip the tabs into place on each side of the cover, at the back of the PC. 7. Lock the cover using the key provided. 8. Reconnect all cables and power cords. Then turn ON the PC and run SETUP. (Refer to "Configuring Your PC".) Completing the Installation Procedure If you installed: 5.25-inch flexible disk drive SCSI device, including CD-ROM drive After installing you need to: Run SETUP and check the drive is detected. If required, select the Bootable Drive . Run SETUP and check the SCSI Integrated Interface is enabled. If you have at least one SCSI hard disk drive installed, check that the SCSI BIOS field is enabled. (Refer to "Configuring Your PC".) In Windows, double-click on the relevant Readme icon in the Hputils group, in the Program Manager. Follow the instructions on how to install the software drivers. HP Vectra XU PC - Setting Up Installing Accessories • 35