HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 HP BladeS - Page 10
Commands, collect
View all HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Commands collect Contact the OA using the supplied credentials and execute a SHOW ALL from the OA CLI, saving the output to an "oaShowAll.txt" file in the current directory. This support action also contacts the primary VC module using the supplied credentials and executes the following commands, saving the output to a "vcmShowAll.txt" file: • show enclosure * • show domain • show network * • show fabric * • show profile * • show stackinglink • show interconnect * • show firmware Item Syntax Parameters: IP USER PWD VCM USER VCM PASS Description vcsu -a collect -i -u -p -vcu -vcp IPv4 address of the active OA in the enclosure* Name of the OA user with privileges to access all enclosure interconnect bays. Minimum length is 1 character. Maximum length is 40 characters.** Password of the OA user. Minimum length is 3 characters. Maximum length is 40 characters.** Name of Virtual Connect user with Domain privileges. Required if an enclosure is in a Virtual Connect domain. Minimum length is 1 character. Maximum length is 31 characters. Password for the Virtual Connect user. Minimum length is 3 characters. Maximum length is 31 characters. *In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure. **In a multi-enclosure environment, USER and PWD parameters for the Onboard Administrator must be identical across local and all remote enclosures in the Virtual Connect domain. Example Collect configuration information from OA and VC: vcsu -a collect -i 192.168.0.100 -u Administrator -p password -vcu Administrator -vcp password Commands 10