HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 HP BladeS - Page 13

Example List the state of modules in an enclosure: vcsu -a healthcheck -i 192.168.0.100 -u Administrator -p password -vcu Administrator -vcp password packageinfo Extract the package information from the supplied package path and display the following information: • Digital Signature Validation (for Virtual Connect firmware version 2.30 and higher) • Package Version • Ethernet Firmware Version Timestamp • Ethernet Firmware Supported Hardware • FC Firmware Version • FC Firmware Supported Hardware • Release Notes (extract, not display) Item Syntax Parameter: FILE Description vcsu -a packageinfo -l Full path to the Virtual Connect package on the local computer or supported remote server Example Display package information from a file named VCpackage: vcsu -a packageinfo -l VCpackage report Display the current running firmware version on all modules in a specific target enclosure. Also display the VC-Enet and VC-FC firmware versions provided in the specified VC package file, and whether or not the module can be updated. In addition to displaying the module firmware version and status, the report command also displays details about the VC package contents. Because the package version details appear, you must provide a VC package file as part of the input at the command line. Item Syntax Parameters: IP USER PWD VCM USER Description vcsu -a report -i -u -p -vcu -vcp -l IPv4 address of the active OA in the enclosure* Name of the OA user with privileges to access all enclosure interconnect bays. Minimum length is 1 character. Maximum length is 40 characters.** Password of the OA user. Minimum length is 3 characters. Maximum length is 40 characters.** Name of Virtual Connect user with Domain privileges. Required if an enclosure is in a Virtual Connect domain. Minimum length is 1 character. Maximum length is 31 characters. Commands 13