HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 HP BladeS - Page 26

Error code Details VCSU_ERROR_VCEM_FW_MAINTENANCE_MODE VCSU_ERROR_PRIMARY_BACKUP_HEALTH_NOT_OK VCSU_ERROR_MIN_TARGET_VERSION_ROLLBACK_ DOWNGRADE VCSU_ERROR_MIN_VCM_VERSION_ROLLBACK_ DOWNGRADE VCSU_ERROR_PRIMARY_NOT_IN_LOWER_BAY_FOR_ DOWNGRADE VCSU_ERROR_ROLLBACK_DOWNGRADE_WILL_NOT_ PROCEED_FOR_MANUAL_ENET_ACTIVATION VCSU_ERROR_VCM_LOCKED_BY_VCEM_AND_FW_ MAINTENANCE_MODE VCSU_ERROR_ROLLBACK_DOWNGRADE_WILL_NOT_ PROCEED_FOR_SERVERPOWERON_NOSAFE VCSU_ERROR_ROLLBACK_FAILED_TO_ACTIVATE_ LOWEST_BAY VCSU_ERROR_ROLLBACK_FAILED_TO_ACTIVATE_ODDSIDE _MODULE VCSU_ERROR_ROLLBACK_ACTIVATE_FAILURE VCSU_ERROR_ROLLBACK_ODDMODULE_MANAGED_ STATUS_NOT_NORMAL VCSU_ERROR_ADD_USER_FAILED VCSU_ERROR_REMOVE_USER_FAILED VCSU_ERROR_SET_NAME_FAILED VCSU_ERROR_AND_EXIT_FROM_UPDATE VCSU_ERROR_MODULE_FAILOVER_FAILED VCSU_ERROR_FIRMWARE_EXTRACT_FAILED VCSU_ERROR_GET_ENCLOSURE_INFORMATION_FAILED VCSU_ERROR_SET_TO_SLAVE_FAILED VCSU_ERROR_SET_TO_AUTO_FAILED VCSU_ERROR_VC_LOGIN_FAILED VCSU_ERROR_ADD_VCM_USER_FAILED VCSU_ERROR_PRIMAYMODULE_BEING_IN_EVENBAY_ AND_NO_BACKUP_MODULE VC is locked and in firmware maintenance state The health of primary or standby module is not OK. The update cannot proceed The target version does not support the downgrade of Virtual Connect firmware without deletion of domain configuration The current version of Virtual Connect firmware does not support the downgrade without deletion of domain configuration Presence of subordinate module on lower bay before primary module will not allow downgrade Rollback downgrade will not proceed for manual activation of E-net modules VC is locked by VCEM Firmware Maintenance mode. Downgrade will not proceed. Powered ON servers or server profile migration since upgrade and performing downgrade may result in duplicate MAC/WWN in the domain. Power OFF the servers to avoid the MAC/WWN duplication and perform the downgrade. Failed to activate lowest E-net bay for rollback Failed to activate odd side modules for rollback Rollback activation failed Odd module managed status is not Normal Unable to add user Unable to remove user Unable to set the user name Fatal error. One or more modules is preventing VCSU from continuing. Correct conditions listed above and retry. Module did not come up with proper role after failover Failed to extract the VC firmware package Failed to get enclosure information Failed to set the module to subordinate state Failed to set the module to auto state Failed to log in to Virtual Connect Failed to add VC user in Onboard Administrator Rollback will not proceed since primary module is in even bay and there is no backup module Troubleshooting 26