HP Xw460c HP BladeSystem c7000 Enclosure Setup and Installation Guide - Page 37
second blank forward until it snaps in place., Install the full-height blank into the device bay.
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Fit the coupler plate into the slots on top of the blank, and slide the coupler plate back until it snaps into place. 3. Fit the slots on the bottom of the second blank on to the tabs on the coupler plate, and slide the second blank forward until it snaps in place. 4. Install the full-height blank into the device bay. Installation 37
Installation 37
2.
Fit the coupler plate into the slots on top of the blank, and slide the coupler plate back until it snaps
into place.
3.
Fit the slots on the bottom of the second blank on to the tabs on the coupler plate, and slide the
second blank forward until it snaps in place.
4.
Install the full-height blank into the device bay.