HP Z3200ps HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 14

3. Double-click the appropriate icon to launch the installer, and then follow the on-screen instructions. Note: if you have an HP Designjet Z2100 or Z3200 we recommend that you select 'Easy Install' to install all elements. If you have an HP Designjet Z3200ps we recommend that you select 'Easy Install' to install the PostScript driver and the HP Printer Utility. If you wish to install the PCL3 raster driver, select 'Custom Install'. 8. The following screen displays information about your printer's installation, where the name of the printer can be modified. Make your changes if necessary and click 'Continue'. 4. Follow the on-screen instructions that take you through the driver installation until you see the HP Printer Setup Assistant. 9. Your printer is now connected. Select 'Create new queue' to connect another printer, or 'Quit' to close the application. 5. Connect your computer to the printer using a USB cable. Ensure that the printer is switched on. 6. In the HP Printer Setup Assistant, click 'Continue'. 7. In the list of printers that appears, select the entry that uses the connection type 'USB' and click 'Continue'. If you have an HP Designjet Z3200ps, scroll sideways to see the Printer Driver column (PostScript or PCL3 Raster). 1.2 set up troja Asia NEW.indd 14 26/06/2008 11:16:13 AM