HP Z620 HP Workstations - CRU Dataport DX115 kit installation - Page 8
HP Z620 Manual
View all HP Z620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
HP Z200 SFF and HP Z210 SFF computers To install a DX115 case in an HP Z200 SFF or HP Z210 SFF computer: 1. Remove the front bezel: a. If necessary, remove the bezel security screw, located beside the middle bezel release tab. Figure 2 Removing the bezel security screw b. Lift the release tabs (1), and then rotate the front bezel off the chassis (2). Figure 3 Removing the front bezel 4 CRU Dataport DX115 kit installation ENWW
HP Z200 SFF and HP Z210 SFF computers
To install a DX115 case in an HP Z200 SFF or HP Z210 SFF computer:
1.
Remove the front bezel:
a.
If necessary, remove the bezel security screw, located beside the middle bezel release tab.
Figure 2
Removing the bezel security screw
b.
Lift the release tabs (1), and then rotate the front bezel off the chassis (2).
Figure 3
Removing the front bezel
4
CRU Dataport DX115 kit installation
ENWW