HP rp5400 User Guide - HP rp5400 Family of Servers - Page 145
Top Cover Removal
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Top Cover Removal The power to the server does not have to be off to remove the top cover and air baffle. However, operation of the server without the top cover in place can make it susceptible to EMI problems. Follow the steps listed below to remove the top cover: 1. Loosen the captive T-15 screws that hold the top cover in place. 2. Grasp the strap handles, raise the cover slightly, and pull the cover toward the front of the server to free the cover tabs from the slots in the chassis. The air baffle will be exposed. Loosen the captive T-15 screws that hold the air baffle in place then lift the air baffle off of the server. The following graphics show the top service bay cover and the air baffle. The first graphic shows the top service bay cover. The second shows the air baffle. Chapter 7 131