HP rp5400 User Guide - HP rp5400 Family of Servers - Page 85
Return the GSP to Default Configurations
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Cable Connections GSP Configurable Parameters Return the GSP to Default Configurations The Default Configuration (dc) command is used to reset all or some of the GSP values to the default values. To return GSP values to default configurations, perform the following steps: 1. Access the GSP with the ctrl+b entry. 2. At the GSP prompt, enter the Default Configuration (dc) command: GSP> dc 3. Follow the prompts for the dc command, and be sure to have the change information available. CAUTION When the Security configuration is reset, all users are removed, including the GSP administrator. It also disables the remote. Remote must be re-enabled through the main console using the Enable Remote (er) command. Chapter 4 71
Chapter 4
Cable Connections
GSP Configurable Parameters
71
Return the GSP to Default Configurations
The Default Configuration (dc) command is used to reset all or some of the GSP values to the default values.
To return GSP values to default configurations, perform the following steps:
1. Access the GSP with the ctrl+b entry.
2. At the GSP prompt, enter the Default Configuration (dc) command:
GSP> dc
3. Follow the prompts for the dc command, and be sure to have the change information available.
CAUTION
When the Security configuration is reset, all users are removed, including the GSP
administrator. It also disables the remote. Remote must be re-enabled through the main
console using the Enable Remote (er) command.