HP rp5400 User Guide - HP rp5400 Family of Servers - Page 146
Top Cover Replacement
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Top Cover Replacement The power to the server does not have to be off to remove or replace the top service bay cover and air baffle. However, operation of the server without the top cover in place can make it susceptible to EMI problems. Set the air baffle in place over the opening for the top service bay and tighten the captive T-15 screws. Follow the steps listed below to replace the top cover: 1. Align the tabs on the end of the top cover with the corresponding slots in the chassis and seat the tabs fully into the slots. 2. Seat the top cover in the top of the service bay and tighten the captive T-15 screws that hold the cover in place. The following graphics show the air baffle and the top service bay cover. The first graphic shows the air baffle. The second graphic shows the top service bay cover. 132 Chapter 7