HP rp5400 User Guide - HP rp5400 Family of Servers - Page 27
Install Stand-Alone Server in a Cabinet, Step 1.
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Server Unpacking and Installation Install Stand-Alone Server in a Cabinet Install Stand-Alone Server in a Cabinet The following describes how to install the A5556A slide-tray assembly into an approved HP cabinet in preparation for installing an rp54xx server. This slide-tray assembly can be installed in an HP E-Series cabinet or other HP cabinets approved for rp54xx system installation. To install the A5556A slide-tray assembly in an approved HP equipment cabinet, proceed as follows: Step 1. Determine what type of cabinet you are installing the slide-tray assembly into. a. E-Series cabinets have: • Parchment white, plastic, sectional, side panels • Black painted vertical frame posts with a partial return flange. Vertical, Rectangular, Mounting Slots b. Approved, non-E-Series, cabinets have: • Single piece metal side panels • Gray painted verticle frame posts with full return flanges. Vertical, Rectangular, Mounting Slots Step 2. Note the vertical, rectangular, slots in the return flanges on the vertical mounting posts. Determine into which of these vertical slots the slide/tray kit will be installed. This is done by counting down eight rectangular slots from the top of the cabinet or the bottom of the equipment above. Chapter 2 13