HP t5400 Troubleshooting Guide: HP t5400 Thin Client - Page 33
Setup Utility—Advanced BIOS Features, Setup Utility—Integrated Peripherals, Table 3-4
View all HP t5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setup Utility-Advanced BIOS Features Table 3-4 Setup Utility-Advanced BIOS Features Option Description Quick Power-on Self Test Allows the system to skip certain tests while booting. This will decrease the time needed to boot the system. Enabled/Disabled. Default is Enabled 1st Boot Device Select Boot Device Priority. Default is USB. 2nd Boot Device Select Boot Device Priority. Default is ATA Flash. 3rd Boot Device Select Boot Device Priority. Default is Network. Boot Up Numlock Status Select power on state for Numlock. Default is OFF. Security Option Select whether the Password is required every time the system boots or only when you enter Setup. Default is Setup. POST Delay (secs) Set a delay that is added to POST to allow more time to press F10 to enter the Setup Utility. Default is None. F12 Boot Enable/Disable F12 network boot. Default is Enabled. Setup Utility-Integrated Peripherals Table 3-5 Setup Utility-Integrated Peripherals Option Description Integrated Audio Enable or Disable Onboard AC97 Audio controller. Default is Enabled. Network Controller Enable or Disable Onboard LAN device. Default is enabled. USB Controller Enable or Disable USB controller. Default is enabled. Advanced USB Options Enable or Disable USB external ports. Default is enabled. USB External Ports Default is enabled. USB Keyboard Support Allows use of USB keyboard under DOS. Default is enabled. USB Mouse Support Allows use of USB Mouse under DOS. Default is disabled. Serial Port 1 Select serial port base IO port address and IRQ. Default is 3F8/IRQ4 Serial Port 2 Select serial port base IO port address and IRQ. Default is 2F8/IRQ3 Serial Port 3 Select serial port base IO port address and IRQ. Default is 3E8/IRQ5 Serial Port 4 Select serial port base IO port address and IRQ. Default is 2E8/IRQ10 Parallel Port Select parallel port base IO port address and IRQ. Default is 378/IRQ7. Parallel Mode Select parallel port transfer mode of Standard, EPP, ECP, or ECP/EPP. Default is ECP/EPP. ECP Mode Use DMA Select DMA channel of 1 or 3 if parallel is operated in ECP mode. Default is 3. Using the BIOS Settings 25