Hitachi 51M200 Owners Guide - Page 46

SETUP Magic Focus Tune Up Auto Digital Convergence Adjustment Please turn ON your Projection Monitor for at least 20 minutes before using this feature. The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 47). Your ASPECT Projection Monitor has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence". Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the Projection Monitor. If you move your Projection Monitor, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors. Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes should be directly over each other to produce the white lines. To simplify convergence, ASPECT Projection Monitor incorporates a function called MAGIC FOCUS located on the front control panel, which allows the Projection Monitor to self-adjust. Press this MAGIC FOCUS button and the convergence self adjustment will start and this process will take approximately 20 seconds. If this button is pressed during this process, no change in picture quality will occur. After this 20 second self-adjust period, picture quality will be optimum (do not move the Projection Monitor during self-adjust). You may also select MAGIC FOCUS TUNE UP from the Setup Menu. ON-SCREEN DISPLAY MAGIC FOCUS MAGIC FOCUS NOTES: Only a momentary press of the MAGIC FOCUS button is necessary to start AUTO DIGITAL CONVERGENCE. At any time during this convergence correction process, you may press the MAGIC FOCUS button to exit the MAGIC FOCUS mode. However, the convergence correction process needs to be completed to SAVE the new corrected convergence data. MENU Video Audio Aspect Locks Setup Move SEL Sel SELECT or Setup Magic Focus Tune Up Menu Preference Set The Clock Set The Inputs Set The Color System Set Virtual HD Set Black Side Panel Set Closed Captions About Your TV Move SEL Select Setup Magic Focus Tune Up Aligns the Red, Green, and Blue colors to correct for Magnetic Influences. Adjustment Mode Auto Manual If you want to adjust now Start Move SEL Return SELECT SELECT 46 MAGIC FOCUS