Hitachi C10LA Instruction Manual - Page 22

Dado Cuts Fig. Bb

Get Hitachi C10LA - 10inch Cabinet Saw PDF manuals and user guides
UPC - 717709011052
View all Hitachi C10LA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

English DADO CUTS (FIG. BB) 1. The dado blade insert is included with this saw. Remove the saw blade, original table insert and blade guard. Install the dado and dado blade insert. 2. Instruction for operating the dado is packed with the separately purchased dado set. 3. The arbor (1) on this saw restricts the maximum width of the cut to 13/16". 4. When making full 13/16" dado cuts, it is not necessary to install the outside flange (2) before screwing on the arbor nut (3). Make sure that the arbor nut (3) is tight, and that at least one thread of the arbor sticks out past the nut. 5. Do not exceed 8" diameter dadoes and keep the width 13/16" or less. It will be necessary to remove the blade guard and splitter when using a dado blade. Always use caution when operating a dado blade. 6. Use only the correct number of round outside blades and inside chippers as shown in the dado set's instruction manual. Blade or chipper must not exceed 13/16". 7. Check saw to ensure that the dado will not strike the housing, insert, or motor when in operation. WARNING For your own safety, always replace the blade, blade guard assembly, and blade insert when you are finished with the dado operation. Fig. BB 2 1 3 - 22 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
– 22 –
English
2
1
3
DADO CUTS (FIG. BB)
1. The dado blade insert is included with this saw.
Remove the saw blade, original table insert and
blade guard. Install the dado and dado blade insert.
2. Instruction for operating the dado is packed with the
separately purchased dado set.
3. The arbor (1) on this saw restricts the maximum width
of the cut to 13/16”.
4. When making full 13/16” dado cuts, it is not necessary
to install the outside flange (2) before screwing on
the arbor nut (3). Make sure that the arbor nut (3) is
tight, and that at least one thread of the arbor sticks
out past the nut.
5.
Do not exceed 8” diameter dadoes and keep the
width 13/16” or less. It will be necessary to remove
the blade guard and splitter when using a dado
blade. Always use caution when operating a dado
blade.
6. Use only the correct number of round outside blades
and inside chippers as shown in the dado set’s
instruction manual. Blade or chipper must not exceed
13/16”.
7. Check saw to ensure that the dado will not strike the
housing, insert, or motor when in operation.
For your own safety, always replace the blade, blade
guard assembly, and blade insert when you are
finished with the dado operation.
Fig.
BB
WARNING