Hitachi C10LA Instruction Manual - Page 3

English WARNING Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead based paints • Crystalline silica from bricks, cement and other masonry products • Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. PRODUCT SPECIFICATIONS MOTOR HP (Maximum developed 3.5 Type Induction Amps 15/7.5 Voltage 120/240 Hz 60 RPM (no load 3450 Overload Protection YES SAW Table Size with Extensions 27-1/8" x 40-1/8" Table Extension Right & Left Extension Fence Capacity (Maximum).... Right 30", Left 18" Blade Size 10" Rip Scale YES Rip Fence YES Miter Gauge YES Maximum Cut Depth @ 90 3-3/8" Maximum Cut Depth @ 45 2-1/4" Maximum Dado Cut Width 13/16" Net Weight 299.8 LBS WARNING To avoid electrical hazards, fire hazards or damage to the table saw, use proper circuit protection. This table saw is wired at the factory for 110-120/220-240 Volt operation. It must be connected to a 110-120 Volt / 15 Ampere or 220-240 Volt / 7.5 Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way. Before using your table saw, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury to you or damage to the table saw. - 3 -