Hitachi NC40G Instruction Manual - Page 19
How To Use The Nose Cap, Warning, Clearing A Jam
View all Hitachi NC40G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English To continue nailing in a separate location, move the nailer along the workpiece, repeating steps 1 - 4 as required. Trigger CLEARING A JAM WARNING ⅷ Handle with care to avoid burning yourself, since the nails and nose may become very hot. If nails are jammed in firing head, remove it, and adjust the nailing in the following order. 1 Remove the fuel cell and the battery from the Nailer. Push lever HOW TO USE THE NOSE CAP WARNING ⅷ Before attaching or removing the nose cap, be sure to take your finger off the trigger and remove the fuel cell and battery. NOTE: ⅷ Keep the nose cap on when driving nails into slippery materials such as thin steel sheets. ⅷ Remove the nose cap when driving nails into wood. REMOVING/ATTACHING THE NOSE CAP: The nose cap is attached simply by pressing it onto the push lever. To remove, insert a screwdriver or similar into the gap between the nose cap and the push lever and lever off. Fuel cell Battery 2 Lock follower back in magazine and remove fasteners. 3 Loosen the knob and lower toward the handle. Knob Push lever Nose cap 4 Pull magazine away from the firing head, and clear jam. Driver Push lever Nose cap 5 Connect the fuel cell and the battery to the Nailer. ALWAYS WEAR SAFETY GLASSES. - 19 -